Property Materials Seal

Kaflon seal is professional manufacturer of PTFE seal and Rubber seal , which works in harsh enviroment,like LNG Valve, drilling, pipiline, Oil&Gas industries. Kaflon has certificates of ISO9001,ISO9100,IATF16949,FDA,USP ,etcs.Kaflon...

EPDM rubber is suitable for used in extreme cold temperatures (as low as -60°F/-51°C) and outdoor applications, and is resistant to steam (up to 300°F/150°C), hot water, direct sunlight/UV, silicone oils and greases, dilute acids,...

EPDM has a great acceptance in the sealing world because of its excellent resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (UV). These compounds also withstand the effect of brake...

ED ring is an industrial seal. As a special seal for pneumatic joints such as pipe joints, hydraulic plugs, transition joints, it has a better sealing effect than traditional O-rings. This elastomer seal is used as an axial static seal,...

The range of performance characteristics of Buna-N allows it to be utilized in a diverse set of applications. NBR is often used for gaskets and o-rings in pneumatic, hydraulic, and fuel systems. V-packings and backup rings made from...

Buna-N o-rings also referred to as NBR o-rings and Nitrile o-rings are the most widely used o-ring material in the word because of low cost, good mechanical performance with resistance to water, most basic oils, lubricants and some...

Nitrile is the most widely used elastomer in the seal industry, and commonly used in o-ring and sealing applications. The popularity of nitrile is due to its excellent resistance to petroleum products and its ability to be compounded...

If your application demands good thermal and electrical conductivity, bronze filled PTFE may be ideal. Adding bronze to PTFE also improves wear resistance. However, bronze attenuates the non-stick properties and chemical inertness of...

Graphite filled PTFE provides some similar benefits to 'normal' carbon filled PTFE but without the greatly improved wear resistance. Graphite lowers the coefficient of friction and Graphite filled PTFE has excellent self lubricating...

Adding glass to PTFE ait stronger and more durable, as well as reducing flexibility and likelihood of creep. Glass filled PTFE can operate at the same temperature range as virgin PTFE and is similarly chemically inert. Fluorotec offers...

Glass filled PTFE is short for PTFE glass filled with Creep and wear resistance compared to conventional PTFE. Glass filled PTFE is available for gasket,valve seats, filter housings, pump and instrument construction,electrical industry.

Fluorocarbon elastomers have grown to major importance in the sealing industry. Due to its wide range of chemical compatibility, temperature range, low compression set, and excellent aging characteristics, fluorocarbon rubber is the...